This browser does not support the video element.
Aluminum Sheet For Boat 5A05 is Al-Mg antirust alloy aluminum, which cannot be strengthened by heat treatment. The alloy has a higher magnesium content and a lower strength, similar to 5A03 alloy. Cold deformation can increase strength but decrease plasticity. The plasticity of annealed state is higher, and the shape of semi-cold hardening state is acceptable. The alloy has good corrosion resistance and good weldability, suitable for spot welding, atomic hydrogen welding, gas welding, argon arc welding. Its machinability, annealing state is very poor, half cold hardening state is acceptable.
Key Features and Benefits of Our Aluminum Sheet for Boat:
Marine-Grade Quality: Our aluminum sheet is crafted from high-quality marine-grade aluminum alloy, known for its superior corrosion resistance and strength. This ensures long-lasting durability and reliability, even in the harshest marine environments.
Excellent Corrosion Resistance: Designed to withstand exposure to saltwater and other corrosive elements, our aluminum sheet provides excellent protection against rust and corrosion. This makes it an ideal material for boat hulls, decks, and other marine components.
Lightweight and Strong: Our aluminum sheet combines lightweight properties with high strength, making it easy to handle and install without compromising structural integrity. This contributes to improved fuel efficiency and performance of the boat.
Versatile Applications: Our aluminum sheet is suitable for a wide range of marine applications, including boat hulls, decks, superstructures, and interior components. Its versatility makes it a valuable material for both new constructions and repairs.
Easy to Fabricate: Despite its strength, our aluminum sheet is easy to cut, shape, and weld, allowing for precise fabrication and customization. This ensures seamless integration into various boat designs and modifications.
Smooth Surface Finish: The smooth surface of our aluminum sheet provides an excellent base for painting, coating, and other finishing processes. This enhances the aesthetic appeal and provides additional protection against the elements.
Processing property:
1. Formability
① The plasticity of the alloy in hot state is related to the alloy state, and the annealing state is good
② Its cold stamping performance is also related to the alloy state, annealing state is good
2. Welding performance
① The alloy with hydrogen welding, argon arc welding, spot welding, seam welding performance is good, gas welding performance is poor, is not suitable for brazing
② The strength and plasticity of the weld are high, but the air tightness of the weld is not high
3. Machinability
Poor machining performance
| Product | Contract No. | Lot No. | ||||||||||
| Dimension (mm) | 1.2-200 | Alloy | 5A05 | Piece Count | ||||||||
| Techuique Standard | GB/T3190--1996/EN | Weight(kg) | ||||||||||
| Chemical Composition(%) | ||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
| Standard | 0.5 | 0.5~1.0 | 0.1 | 0.3-0.6 | 4.8-5.5 | - | - | 0.2 | 0.15 | 0.15 | Remain | |
| Notice:Aluminum foil not contains Pb、As and other Virose elements | ||||||||||||
| Mechanical Property | ||||||||||||
| Temper | Thickness | Tensile Strength（Mpa） | Strength(Mpa) | Elongation% | Cup Bulge | |||||||
| O | 1.2-6.3 | 290-365 | 130-205 | - | - | |||||||
| 6.31-80 | 285-360 | 125-205 | 14 | - | ||||||||
| 80.1-120 | 275 | 120 | 12 | - | ||||||||
| 120.1-160 | 270 | 115 | 12 | - | ||||||||
| 160.1-200 | 265 | 105 | 10 | - | ||||||||
| H112 | 6.3-40 | 290 | 130 | 10 | - | |||||||
| 40.1-80.0 | 285 | 125 | 10 | - | ||||||||
| H116 | 1.6-30 | 315 | 230 | 10 | - | |||||||
| 30.1-40 | 305 | 215 | 10 | - | ||||||||
| 40.1-80.0 | 285 | 200 | 10 | - | ||||||||
| 80.1-110 | 275 | 170 | 10 | - | ||||||||
| H321 | 4.0-12.5 | 315-405 | 230-315 | - | - | |||||||
| 12.51-40.0 | 305-385 | 215-305 | 10 | - | ||||||||
| 40.1-80.0 | 385-385 | 200-295 | 10 | - | ||||||||
| H323 | 1.2-6.3 | 330-400 | 250-315 | - | - | |||||||
| H343 | 1.2-6.3 | 365-435 | 285-350 | - | - | |||||||
Productivity: 1500 tons per month Transportation: Ocean,Land
Place of Origin: China Supply Ability: 1050 tons per month
Certificate: ISO9001 HS Code: 76061199
Payment Type: L/C,T/T In co term: FOB,CFR,CIF,EXW
It is commonly used in the manufacture of welded pipes, welded fuel tanks and other liquid containers, and other parts requiring high process shape, good corrosion resistance and medium load bearing. Wires used as welding rods and rivets shall be anodized. It is also used to make armor plates, high-strength structural parts, storage tanks, pressure vessels, and Marine supplies components
Packing: Strong seaworthy wooden pallet or customized
Loading Port: Shanghai,Ningbo,Xiamen,Qingdao